Diy Stamps In Two Different Ways

Two different ways of creating stamps

Posted by CurlyMade

About

Learn how to make stamps in two different ways, one using rubber other using a recycled tetra pack package and leftover pieces of craft foam.

Share

You Will Need (7 things)

  • Craft Foam
  • Hot Glue
  • Scissors
  • X Acto Knife
  • Pencil(s)
  • Rubber
  • Tetra Pack Package

Steps (4 steps, 30 minutes)

  1. 1

    If you are going to make rubber straps, a good way to make sure the stamp will be exactly as you want it, is freehand or print a piece of paper with the design you want to create and trace it onto the rubber. Then you just have to cut it following the lines.

  2. 2

    To make the craft foam stamps, I started by making the base of the stamp where you will be gluing the foam. I used a tetra pack package, cut it in squares and small rectangles and hot glued several layers together till I had the size I wanted.

  3. 3

    Finally, cut the craft foam with the shape you want, and glue it to the base.

  4. 4

    And it's finished :)