https://www.cutoutandkeep.net/projects/diy-stacked-beaded-bracelets • Posted by Alicia M.
Get Your Materials: *Elastic Cord *Tape *Measuring Tape *Scissors *charms *Variety of beads..Just make sure the beads you use are no bigger them 2 to 3mm any larger and the elastic will break because of the weight. *G-S Hypo Cement or Craft Glue
Make The Bracelet: *Measure your elastic cord to your wrist size ( I measured mine at a 6 1/2) If your wrist is alittle bigger here are some measurements to help: -Small:6-7inches -Med:7 1/2-8inches -Large: 8 1/2-9inches *Add 4 additional inches to your actual wrist size (Mine stopped at 10 1/2) *Cut the cord with your scissors
*Center your charm *Secure the right side of the cord with tape *Add your beads to the left
Make The Bracelet cont... * Continue to add beads to your cord * Stop when your cord is 1 in from the end (Take off beads if neccessary). *Add beads to the right side of the cord
*After adding the beads to the right 8side of the cord * Check the fit of your bracelet * Take off or add any beads neccessary * Gather ends of cord and tie in a knot 2x. * Add craft glue to the knot * Let it dry overnight * Trim excess cords with scissors
Tah-Dah!!!! You are done. Go and rock your stacked bracelets like a starlet.