https://www.cutoutandkeep.net/projects/diy-shoebox-charging-station • Posted by Audrey W.
Learn how to quickly make a shoebox recharge station, housing all the ugly and tangling chargers for your devices behind a neat and beautiful cover. The definitive guide is over at this location. Check it out for a thorough step by step. http://www.instructables.com/id/How-to-DIY-Shoe-Box-Charging-Station-for-Your-Devi/
Learn how to quickly make a shoebox recharge station, housing all the ugly and tangling chargers for your devices behind a neat and beautiful cover. The definitive guide is over at this location. Check it out for a thorough step by step. http://www.instructables.com/id/How-to-DIY-Shoe-Box-Charging-Station-for-Your-Devi/
The Materials You Need: A power coupler A cardboard box Scissors Office knife Glue / Duct tape Pencil / Pen Ruler Paper Clippers Decorative hole frames / Washers / Spacers Other decorative elements
Get your shoe box and decorate it based on your taste. I wrapped mine in gifts paper. I carefully traced the box on the back of the paper, leaving margins. The margins will then create overlapping flaps to go around the corners. Watch out to not mess up the pattern of the paper. Assemble first, before gluing.
I took my decorative rings, I spaced them out on the face side of the box and I traced them on the paper. Then, I cut out the holes and glued the rings on.
I made a hole on the back side for the power coupler and assembled the chargers with the coupler inside the box. I pulled out the cords and labelled each hole to it's respecting device charger.
I'm done.