Diy Passport Holder

Posted by

About

Here comes our new discovery about DIY passport holder. It seems to be a piece of good news for those who are fond of travelling abroad. Have you ever troubled in finding your passport throughout your handbag when you are about to go aboard? If so, a passport holder is absolutely perfect for you.
Interlayers are designed inside the passport holder. You can put your credit card, identity card and other necessary cards in it. Much convenience brings to you if you learn DIY passport holder. Do you want your trip more portable and accessible? Follow us and it will belong to you.

You Will Need (7 things)

Cotton Fabric
Sewing Thread
Needle
Leather Agraffes
Zipper
Scissors
Ruler

Steps (3 steps, 90 minutes)

1

Make the outside fabric
1st, cut out 10x17cm outside fabric and lining fabric; piece two pieces to 18 x17cm shape and seam with 1cm distance.
2nd, fold 18 x17cm piece to 9 x 17cm; sew 15cm zipper at the folded place.
3rd, cut out 10x17cm outside fabric and lining fabric; piece two pieces to 25x17cm shape and seam with 1cm distance.
4th, place the 18 x17cm piece and 25x17cm piece together as it is shown below; sew the other side of the zipper.
2

Cut the interlayer pieces
5th, turn the fabric to the right side.
6th, sew the right side of zipper again; add cotton fabric at back by sewing.
7th, make 51.5 x17cm left interlayer fabric as following shows: 6cm, 4.5cm, 6cm, 4.5cm, 6cm, 4.5cm and 20cm in a line.
8th, make 18x17cm right interlay fabric; fold the fabric into 9x17cm shape.
3

Combine the outside fabric and interlayer piece
9th, seam the right interlay to the right side of the left interlayer; baste back faced outside fabric and interlayer fabric.
10th, cut out a strip; add snap button to the strip.
11th, you can sew leather agraffes directly if you do not know how to make snap button to fabric.
12th, then hem the whole edges of the passport holder.

Diy Passport Holder