https://www.cutoutandkeep.net/projects/diy-make-collapsible-fabric-bowls • Posted by HaberdasheryFun
Make small fabric bowls to hold all the clutter. The best part, they collapse and can be taken anywhere!
Make small fabric bowls to hold all the clutter. The best part, they collapse and can be taken anywhere!
Cut 2 fabric bowl pieces - 1 lining and 1 outside
Cut stabilizer pieces
Lay stabilizer pieces down onto the OUTSIDE fabric bowl pattern piece. Leave a scant 1/8″ gap between each piece. Remember to lay these on the backside of the fabric, place the rough/pebbly side facing down. Place a piece of fabric on top and press each small piece in place with a hot iron.
Clip into all corner seam allowances. Turn and roll the seam allowances towards the backside/interfacing. Press in place with an iron. Use a fabric glue stick at the edges help hold in place.
With wrong sides facing each other, place the fabric bowl pieces together. Adjust so that the seam allowances are even at all sides. Trace along the outside edge with a disappearing fabric pen.
Place the outside fabric bowl piece to the side. Following the disappearing fabric pen line, turn and roll the towards the backside. This is similar to step 4, without having interfacing on the backside of the fabric. Press in place with an iron. Place the fabric bowl pieces together, wrong sides together. Press again with an iron.
Pin at edges. Place into sewing machine and stitch together around outside edge. Take out of sewing machine. Gently fold along the gap between the interfacing. Using the disappearing fabric pen, draw a line in each gap. Draw all lines. Place into sewing machine and stitch following lines. Remember to backstitch when stopping at each edge.
Cut 4 small pieces of Velcro, each measuring 1/2″. Pull apart and place at the corner pieces, as close to the top edge as possible. Pin in place if needed. Place into sewing machine and sew all Velcro in place.