Cut Out + Keep

Diy Jewellery Stash

Make an awesome functional wall decoration, that protects and organizes your jewellery !

https://www.cutoutandkeep.net/projects/diy-jewellery-stash • Posted by Audrey W.

This jewellery box is the perfect place to store your necklaces, rings, bracelets, earrings and any other accessory you might have. It's stylish, completely customized by your artistic state AND best of all concealed. The artwork works as a cover lid to securely store your jewellery out of sigth and out of touch, while keeping them organized for longer.

You will need

Project Budget
Reasonably Priced

Time

5 h 00

Difficulty

Tricky
Medium 110811 2f2015 09 04 093345 article spin box

Description

This jewellery box is the perfect place to store your necklaces, rings, bracelets, earrings and any other accessory you might have. It's stylish, completely customized by your artistic state AND best of all concealed. The artwork works as a cover lid to securely store your jewellery out of sigth and out of touch, while keeping them organized for longer.

Instructions

  1. Small 110811 2f2015 09 04 093450 article step1 assemble the box

    Using 2x 420:100:50mm boards and 2x 287:100:50 mm boards and some nails, assemble the wooden frame of the box. The shorter boards should sit in between the longer ones.

  2. Small 110811 2f2015 09 04 093458 article step1 attach the hardboard

    With the frame lying on its face, put the hardboard (420:287mm) on top and nail securely or screw.

  3. Small 110811 2f2015 09 04 093523 article step2 attach the cover

    Mark equally spaced positions for the three hinges on the inside of the cover and the lower end of the frame. Check if they align. Screw the cover first, then using somebody's help to hold it in position, attach it to the bottom of the frame.

  4. Small 110811 2f2015 09 04 093527 article step3 screw the hooks

    Draw out your internal distribution and screw in the hooks.

  5. Small 110811 2f2015 09 04 093531 article step4 magnet catches

    Attach the magnet catches to the top end of the cover and the frame the same way you did with the hinges. That's it, you're ready.