Diy Bunny Ears Headband

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Wrap headband
  Stick a lace to the headband with a little extra length by double-sided tape. Stick a length of double-sided tape to the wrong side of the headband and stick both sides of lace to wrap it.

• 

  Step 2

  Decorate both ends
  Cut a short strip of satin ribbons with width of 0.6cm and fold both ends inwards to wrap the both ends of headband. Sew the edges to fasten the ribbon. Do the same to sew the other side.

• 

  Step 3

  Make bunny ears
  Cut out two pieces of cloth as the picture shows and sew along the edges with an opening as bunny ears. Turn it inside out and bend a similar shape with the bunny ears using iron wire.

• 

  Step 4

  Attach bunny ears
  Insert the iron wire into the cloth and tie excess iron wires on the headband in place. Wrap the other lace around the headband covering the iron wires and glue the ends.

• 

  Step 5

  Add buttons
  Fold a short strip of waxed cord into a bow shape and glue it to the wrong side of headband between bunny ears. Cut a small piece of felt with teeth shape and glue it to cover the bottom of the bow. Wrap a strip of ribbon with width of 0.3cm over the wrapped lace with threading four buttons in the middle and glue the ends.

Comments

Leave your comment