https://www.cutoutandkeep.net/projects/diy-bunny-ears-baby-teething-rattle • Posted by Estelle C.
Print the pattern and cut it. Place it on the minky fabric and pin it. Mark the contour with your erasable pen and remove the pattern. Repeat the operation on the cotton fabric. Cut the two pieces using your scissors. You now have a piece of minky and a piece of cotton.
Place the two pieces back to back and pin them. Use your sewing machine to sew them together at 0.5cm from the edge all around except on 6cm long where you will keep a hole to turn your work.
Turn the work upside down through this hole and sew the remaining part by hand using the invisible stitch.
You are now ready to assemble the ears and the ring. To do so, you just need to fold the fabric piece in two. Place the loop over one side of the ring. Fold the ears around the ring and insert them between the ring and the fabric to create a knot. Pull the crossing part upwards to block the knot and arrange the ears nicely. You are done! You can try many different types of minky fabric and cotton patterns.