Cut Out + Keep

Diy Bracelet Display

DIY Bracelet display from recycled materials

https://www.cutoutandkeep.net/projects/diy-bracelet-display • Posted by Rozantia P.

I made a bracelet display out of a piece of polystyrene packaging sheet, polyethylene shockproof insulation for electronics packaging and thrifted yarn. We were unpacking a new electronics gadget and I had a blast how to use the packaging materials for this project :)

You will need

Project Budget
Almost Nothing

Time

1 h 00

Difficulty

Pretty Easy
Medium 2014 03 16 112610 1 dsc00444

Description

I made a bracelet display out of a piece of polystyrene packaging sheet, polyethylene shockproof insulation for electronics packaging and thrifted yarn. We were unpacking a new electronics gadget and I had a blast how to use the packaging materials for this project :)

Instructions

  1. Small 2014 03 16 113123 1 dsc00079 001

    The materials I used: a piece of polystyrene packaging sheet, polyethylene shockproof insulation for electronics packaging and thrifted yarn. You could use anything roundish a bracelet can fit and yarn, fabric or ribbon to cover it - whatever you can think of!

  2. Small 2014 03 16 113134 1 dsc00081

    I wrapped the sheet around the insulation piece and then wrapped the yarn on top. I used both hot glue and E6000 in the process.

  3. Small 2014 03 16 113147 dsc00440

    I covered the holes on both sides with twisted fabric flowers but, again, it's up to you.