Diy Bow Belt

About

You Will Need (3 things)

Steps (5 steps, 30 minutes)

1. 1

   belt directions:

   step 1: measure your waist and add two inches to the length.

   step 2: cut out fabric 2 inches by the previous length

2. 2

   step 3: fold the fabric in half "hot-dog" style with the yuckier sides facing out toward you and press with an iron. Fold in the edges at the top and bottom of the belt 1/4 inch and press.

   step 4: Sew along the edge with a 1/4 inch seam allowance. (not the top or bottom)

   step 5: turn that sucker inside out (use a pointy device to help you with this.)

   step 6: Sew along the top and bottom (your frayed edges should be neatly tucked inside.) set the belt aside.

3. 3

   step 1: cut out two rectangles of fabric, 1 large, 1 smaller. I did 4 x 10 for one, and 3 x 5 for the other.

   step 2: fold the large rectangle in half, press it with an iron and fold in the edges of at the top and bottom (about 1/4 inch) and press.

   step 3: sew along the long edge. turn inside out and press the fabric so that the seam is in the middle-- (see the image at left)

4. 4

   step 4: tuck one end into the other and stitch it so you have a tube (see above image at right)

   step 5: follow step 2 for the small rectangle. This should result in a nice little tube (see image at left).

   step 6: Pinch your large rectangle into a bow shape and squeeze it through the tube.

5. 5

   bow belt:

   step 1: stitch the bow to your belt

   step 2: measure where you want your snaps to be (I wrapped the belt around my waist toward the front and marked with a pen where I wanted the snaps to line up) and sew them on.

   step 3: pair your cute bow belt with your favorite dress or skirt!