Diy Bangle Bracelets For Small Wrists
Diy bangle bracelets for small wrists
Posted by
About
A special diy bangle project for thin and slim women; while making the bangle bracelets for small wrists, you may make use of 2mm aluminum wire, 0.3mm brass wire and strand of shell bead, an easy diy spring and summer bracelet.
Share
You Will Need (4 things)
- Bead Strand
- Wire
- Round Nose Pliers
- Flat Nose Pliers
Steps (6 steps, 120 minutes)
-
1
Materials needed in diy bangle:
Shell Bead Strand
2mm Aluminum Wire
0.3mm Brass Wire
Round Nose Plier
Flat Nose Plier
Cylindrical stick
-
2
Step1: form the frame
1. Snip 35cm long aluminum wire. Or in case, determine your own length about 5cm long than your personal wrist circumference;
2. Find the center location on aluminum wire and form a radian around the cylindrical stick. That may decide the width of your diy bangle;
3. Curve the two end tips inwards. Stop when each reaches half the width;
4. Take the brass wire coil and wrap the edges of semi-finished frame randomly;
5. Snip the brass wire when finished entire frame;
6. Take another strand of brass wire and wrap the frame again, this time is in order to make the frame stay in shape.
-
3
Step2: add on the beads
Take the 3rd strand of brass wire, each time wrap a coil sliding on 1 or 2 shell beads for embellishment.
-
4
Keep wrapping freely and threading on beads at same time until adorn entire bangle.
-
5
Step3: shape your bangle
Find a cylindrical object that own a circumference as same as your wrist, then shape your bangle around it.
-
6
Take the bangle off and this is your diy bangle bracelets for small wrists!In fact, have small wrists do not mean you should stop wearing or bid farewell to the personalized bangles. To keep your bangles on and still remain stylish, just have a try on the diy bangle bracelets for small wrists. The step-by-step instructions may help go about this work