https://www.cutoutandkeep.net/projects/diy-a-cute-clutch-bag • Posted by
A girl can never have too many bags, right? Here a kind of clutch bags is just right to meet your need. It will be absolutely worthwhile to stay at home concentrating on DIY clutch bag which is elegant, glamorous and boxy. It will not take too much of your cost to make the clutch bags below compared with the bags you bought from an exclusive shop. Moreover, your personality and uniqueness can be fully shown through its appearance. Now let's begin DIY clutch bag of your own together.
A girl can never have too many bags, right? Here a kind of clutch bags is just right to meet your need. It will be absolutely worthwhile to stay at home concentrating on DIY clutch bag which is elegant, glamorous and boxy. It will not take too much of your cost to make the clutch bags below compared with the bags you bought from an exclusive shop. Moreover, your personality and uniqueness can be fully shown through its appearance. Now let's begin DIY clutch bag of your own together.
Cut the fabric pattern Measure the template by tracing around the paper pattern you have drawn; cut out two pieces of body fabric: outer body fabric and interior body fabric. Cut out a small strip at the bottom of the interior fabric. Do the same to cut out two rectangles in picture 3. Place the outer fabric with right side down; fold the up right angle.
Cut the interior rectangle Lay the outer rectangle with right side down; fold the up right angle. Mark the edges of the interior rectangle with the middle bottom unmarked. Cut out the unmarked place. Then get the shape as it is seen in the picture 4.
Overlap the two pieces of body fabric Do the same as step 2 to cut out the interior body fabric. Get the shape shown in the picture 2. Cover the interior body fabric on the right side of the outer body fabric. Adjust the two pieces of fabric; make them well aligned.
Sew two pieces of body fabric and rectangle Align the two pieces of body fabric; trim the edges of the two pieces; back stitch the edges of the body fabric. Seam the two pieces of rectangle fabric in the same way. Place the body fabric with right side down; fold the left semi-circle.
piece the whole bag structure Fold the right semi-circle. Sew the junctions of the semi-circle and rectangle below at each corner. Divide five parts at each side of the semi-circle; make marks. Place the rectangle fabric on the body fabric; make layer with one side at marked 2 and the other side at marked 4 as it is shown in picture 4. Sew the two corners of marked 2.
Sew the bag structure Sew the two corners of marked 4. Note to flatten the marked 4 fabric before you fix it through stitch. Then the basic bag structure is done as the picture 3 shows. Fold the outermost rectangle body fabric to the marked 1; adjust a right angle at both sides; sew the shapes.
Sew a snap-fastener inside the lower middle of the front cover; match the other snap-fastener on its body fabric. Sew a cotton label on the place where you sew the snap-fasteners.