Dinosaur Earring

there's a pterodactyl flying around you!

https://www.cutoutandkeep.net/projects/dinosaur-earring • Posted by illegalcreativity

it also glows in the dark, if it wasn't good enough :D

You will need

Rotary Tool Or Drill and drill bit Eye Screw Earring Findings (jumpring, chain, earring hook, etc.) Plastic Toy

Project Budget

Time

Difficulty

Description

it also glows in the dark, if it wasn't good enough :D

Instructions

1. 

   find your dinosaur (or any other plastic model toy). if it's going to be an earring, try to keep it as light as possible.

2. drill a hole. use a drill tool or dremel. if you don't have either and have a lot of time and strength, it's possible to stick a tiny hole with a sewing needle (hold it with pliers) or something sharp. if there's a thin area, use that (then add a jumpring, a chain and a hook!)

3. 

   if there's no thin area, drill a hole from the top and screw an eye screw in make sure the hole you drill is SMALLER than the eye screw or it'll just slip off/fall out attach a chain and earring hook and you've got a dinosaur buddy!