Dinosaur Earring

there's a pterodactyl flying around you!

Posted by illegalcreativity

About

it also glows in the dark, if it wasn't good enough :D

Share

You Will Need (4 things)

  • Rotary Tool Or Drill and drill bit
  • Eye Screw
  • Earring Findings (jumpring, chain, earring hook, etc.)
  • Plastic Toy

Steps (3 steps, 10 minutes)

  1. 1

    find your dinosaur (or any other plastic model toy).
    if it's going to be an earring, try to keep it as light as possible.

  2. 2

    drill a hole.
    use a drill tool or dremel. if you don't have either and have a lot of time and strength, it's possible to stick a tiny hole with a sewing needle (hold it with pliers) or something sharp.

    if there's a thin area, use that (then add a jumpring, a chain and a hook!)

  3. 3

    if there's no thin area, drill a hole from the top and screw an eye screw in

    make sure the hole you drill is SMALLER than the eye screw or it'll just slip off/fall out
    attach a chain and earring hook and you've got a dinosaur buddy!