Cute Panda Cushion
A really adorable and simple panda cushion (:
Posted by Maisiee (:
About
Share
You Will Need (5 things)
- Felt
- White Fabric
- Wadding
- Sewing Machine
- Needle And Thread
Steps (4 steps, 90 minutes)
-
1
Sorry I dont have any photos for the project but I hope i'll be able to explain it well enough. Also the yellow bow was mainly cut out on the photo but you can improvise (:
Cut out two white circles of fabric for the face. Then cut and out the eyes, nose, ears, a bow and marking around the eye from felt.
-
2
Tip- You can Iron the White fabric at this point for a neater finish.
Then hand sew the felt peices in place onto one peice of the white fabric. Make Sure you sew the ears and bow just down from the edge of the face.
-
3
Next put the two circles back to back so that the face is on the inside. Now machine sew around the edge or the circles, leaving a gap big enough for you to fit your hand through.
-
4
Now turn the panda the right way round.
Put plenty of wadding into the panda, through the gap you left, and finally sew up the opening.Your Cute Panda is finished! (: (:
I hope that makes sense. If you have any questions please ask (: