Cut Out + Keep

Cross Over Button Clasp Shrug

ThreadBanger Contest Entry: This cross-over shrug is unlike anything you've seen before. I hope.

https://www.cutoutandkeep.net/projects/cross-over-button-clasp-shrug • Posted by Alyssa R.

I wanted to create something to enter into ThreadBanger's New Year's sewing machine contest. I had to create a video tutorial of something and they'd pick a winner by February 12th to win a sewing machine. Unfortunately my camera is broken so I had to take pictures. If I can figure out how to turn them into a video collage or something, I will, but at the moment I'm content with posting the tutorial here because I'm very proud of it. It took me weeks of agonizing over how to pull this off and make a pattern, and I finally just sat down today and started drafting. It took 2 hours to complete all the cutting, sewing, measuring, and modeling, but I spent all day writing out the tutorial and messing around with options. I'm sure anyone else is thinking, "Oh, that's so easy. How could you NOT see how to make it?" And I totally agree, but it's a tricky, tricky project if you don't realize it HAS to wrap across the front. I ran into so many problems, but I present to you the working tutorial.

You will need

Project Budget
Almost Nothing

Time

2 h 00

Difficulty

So-so
Medium threadbangerentry041 Medium threadbangerentry042 Medium threadbangerentry043

Description

I wanted to create something to enter into ThreadBanger's New Year's sewing machine contest. I had to create a video tutorial of something and they'd pick a winner by February 12th to win a sewing machine. Unfortunately my camera is broken so I had to take pictures. If I can figure out how to turn them into a video collage or something, I will, but at the moment I'm content with posting the tutorial here because I'm very proud of it. It took me weeks of agonizing over how to pull this off and make a pattern, and I finally just sat down today and started drafting. It took 2 hours to complete all the cutting, sewing, measuring, and modeling, but I spent all day writing out the tutorial and messing around with options. I'm sure anyone else is thinking, "Oh, that's so easy. How could you NOT see how to make it?" And I totally agree, but it's a tricky, tricky project if you don't realize it HAS to wrap across the front. I ran into so many problems, but I present to you the working tutorial.

Instructions

  1. Small threadbangerentry012

    Begin by taking your shirt (I chose a long sleeved shirt) and cutting off the sleeves just outside the seams. Set the sleeves aside, making sure you remember which sleeve is which.

  2. Small threadbangerentry010

    Then cut up both the left and right sides, completely removing the seams.

  3. Small threadbangerentry013

    If your shirt has a hemmed bottom, cut it off.

  4. Small threadbangerentry008

    Now go to the top of the shirt and completely cut off the shoulder seams and collar.

  5. Small threadbangerentry014

    Lay out both body pieces.

  6. Small threadbangerentry011

    Take your measuring tape and measure the diagonal distance across one cup of your bra. I'm a B, and I used 8 inches as my measurement.

  7. Small threadbangerentry015

    On the front body piece, use your chalk or marker to mark this measurement.

  8. Small threadbangerentry016

    Continue making marks along the entire front length until you run out of fabric, typically around the armpits. I fit two 8 inch rectangles on my shirt with a half inch in between.

  9. Small threadbangermannequin 1

    Click on the image to enlarge for specific instruction. Take the measuring tape and pin it to your current shirt, two-three inches below the highest point of your shoulder. Cross the tape over your left breast, under the right one, around your back, under the left, and across the right until you reach the equivalent two-three inches below the right shoulder. This is the measurement you'll need for the wrap. Add on 2 to 3 inches for hemming and seams, unless you're using a stretchy material.

  10. Small threadbangerentry017

    Using the number you found, measure the length of a marked rectangle you made. Multiply that number by however many rectangles you managed to fit on the shirt. I needed more fabric and used the back piece. If you do, MAKE SURE you cut ONLY UP TO THE ARMPITS! You need the back for a later step.

  11. Small threadbangerentry018

    Cut out all the rectangles and begin pinning them all together.

  12. Small threadbangerentry020

    Put on your left sleeve.

  13. Small threadbangerentry021

    Very carefully pin the end of one of your pinned lengths to the left sleeve, beginning from the armpit and going along the front as far as it will go, which should be just about where you previously pinned your measuring tape.

  14. Small threadbangerentry019

    Put on your right sleeve. Follow the instructions from Step 9 using the fabric instead of the measuring tape. Make sure it comes within 3 inches of the right sleeve.

  15. Small threadbangerentry024

    Unpin from the sleeve and set aside. Gather your two sleeves and hem all the way around. Don't be alarmed if it scallops.

  16. Small threadbangerentry025

    Next, hem the last short side of the pinned lengths. Sew all the short sides of the wrap pieces together. If you wish to hem all the unfinished edges, now is the time to do so.

  17. Small threadbangerentry026

    Now pin the short hemmed end to the same place on the left sleeve as before. Sew them together.

  18. Small threadbangerentry027

    Put on your left and right sleeves, and follow the wrapping instructions from Step 9. Trim any excess fabric you have. Don't be alarmed if you have a gap of about 3 inches. Just pull the wrap a little tighter.

  19. Small threadbangerentry021

    Hem the short edge of the wrap. Now pin the short end from armpit to below the shoulder, along the front. Sew together.

  20. Small threadbangerentry028

    You're almost done!!

  21. Small threadbangerentry029

    Measure two 2&1/2" by 1" rectangles on the front body scraps.

  22. Small threadbangerentry030

    Fold into a line by thirds, and sew all the way down. Leave all edges unfinished.

  23. Small threadbangerentry035

    Take one piece and fold short end to short end, forming a loop.

  24. Small threadbangerentry036

    Take your sleeve and fold at the armpit so both sides are even. Across from where the top of the wrap starts is where you should pin the loop (on the back).

  25. Small threadbangerentry037

    Sew down one loop. Repeat Step 24 on the right sleeve and sew.

  26. Small threadbangerentry031

    Now find your remaining back piece. Measure 3 inches from the bottom and mark across the entire width of the piece.

  27. Small threadbangerentry032

    Fold edges toward the center, then fold in half and pin. Tuck in the holes at each end and sew.

  28. Small threadbangerentry033

    Grab one of your buttons and a needle and thread. Cut about three feet of thread and fold it in half. Cut. Fold it in half again. Cut. Thread the needle, knot the end, and sew the button to the end of your strip, making a cross.

  29. Small threadbangerentry034

    Repeat with the same side of the fabric, on the opposite end. You should now have a strap with 2 buttons.

  30. Small threadbangerentry038

    Slide the loop on your left sleeve around one of the buttons, and put on the left sleeve.

  31. Small threadbangerentry039

    Follow the wrapping instructions in Step 9, and slide on your right sleeve. Reach back, grab your button strap, and attach it to the loop on your right sleeve. Then wear with your favorite bare-shouldered top, 'cause you're done!!