Crafterella Apron

February's outfit for Project Paperdoll with Fabric On Demand

Posted by Cat Morley

About

Share

You Will Need (4 things)

  • Pins
  • Sewing Machine
  • Crafterella print on 7 Ounce Cotton Duck (available from Fabric On Demand)
  • Matching Thread

Steps (7 steps, 120 minutes)

  1. 1

    Luckily you don't need a pattern for this project as the cutting lines are included with the print. Start by cutting out the apron along the outside dashed line and the straps along the outside coloured edge.

  2. 2

    Flip the straps over so that the wrong side is facing up and fold all the edges in along the marked line. Press in place.

  3. 3

    Fold the straps in half and sew around the outside edges.

  4. 4

    Flip the apron over so that the wrong side is facing up and then fold the outside edges in to the second dashed line and press in place.

  5. 5

    Fold the outside edges in again to so that the straight line, press and sew around the outside edges.

  6. 6

    Sew the two straps in place at either side of the apron so they match the waistband.

  7. 7

    Flip the apron over so that the right side is facing up. Stitch either side of the tape measure strap to either side of the top of the apron.