Concrete Vases Diy

Concrete Vases DIY

Posted by CraftsmitHerz

About

Well, concrete is still all over right now. Also here on Crafts mit Herz.
As we´ve been renovating our new home, I had some concrete and some time left over.
I made some concrete vases with plastic cups as moulds, it´s pretty easy you gotta try it!

Share

You Will Need (4 things)

  • Protective Gloves
  • Water
  • Plastic Cup(s)
  • Concrete

Steps (3 steps, 1440 minutes)

  1. 1

    So what you need:
    concrete
    plastic cups in two sizes
    water
    gloves!
    something strong to stir, I used a little shovel
    stones as weight

    Gather your materials and make sure you wear protective gloves and googles.

  2. 2

    Mix concrete and water following the instruction given on the concrete bag. Wear gloves and a mouth protection so you do not breathe in the dust! Mix until it has a doughy consistency.

    Pour the concrete in the bigger cup, so it´s round about 60% full, and push in the smaller cup. The smaller cup needs to stay in place so fill it up with stones, gravel, whatever you have on hand.
    Make sure everything is where it´s supposed to be and let it dry.

    So now comes the hard part. Wait at least 24hours before you get the vases out of the mould.
    Trust me. Get the small cup out and than peel off the big one.

  3. 3

    Voila! You got some cute vases. They look good in the garden and inside! And they are so versatile :-)