Cut Out + Keep

Coffee Filter Flower

Decorative flowers

https://www.cutoutandkeep.net/projects/coffee-filter-flower-2 • Posted by KMOM14

This makes a great kids craft as the coffee filters hold up much better than tissue paper when making them.

You will need

Project Budget
Cheap

Time

0 h 20

Difficulty

Nice & Simple
Medium cf 2bfinsished Medium cf 2b1

Description

This makes a great kids craft as the coffee filters hold up much better than tissue paper when making them.

Instructions

  1. Small cf 2b2 2bflat

    Keep the coffee filter together and press them down flat.

  2. Small cf 2bfold 2b1

    Fold the coffee filters up accordion style (I folded about an inch in and ended up with three pleats total, but you could make the folds larger or smaller).

  3. Small cf 2bfolded 2bup 2b2

    Continue folding until you get to the end of the filter

  4. Small screenhunter 05 2bjun. 2b26 2b06.42

    Fold in half an snip the corner in the center diagonally on each side slightly (this will be where you will twist the pipe cleaner later. For now, leave the filters folded.

  5. Small screenhunter 06 2bjun. 2b26 2b06.42

    Put approximately 1/2 cut water in a bowl and 6 -10 drops of food coloring and mix it up.

  6. Small screenhunter 07 2bjun. 2b26 2b06.43

    Stick the ends in the food coloring and allow it to saturate for a few minutes.

  7. Small screenhunter 08 2bjun. 2b26 2b06.43

    Take out and allow to dry.

  8. Small screenhunter 09 2bjun. 2b26 2b06.43

    Next, mix approx 1/4 cut water in a bowl and 6-10 drops of food coloring

  9. Small cf 2byellow 2bdip

    Stick the folded center into the mixture, allow it to saturate until the color starts to meet up the color from the ends.

  10. Small screenhunter 10 2bjun. 2b26 2b06.43

    Remove and unbend at center but leave the pleats folded. Allow to dry.

  11. Small cf 2btwist 2bpipecleaner

    Once dry, take the 1/2 piece of pipe cleaner and twist around the center to make the stamens. You can leave up or twist the two sides into loops.

  12. Small cf twist 1

    Start separating the layers on one side of the pipe cleaner, pulling the top layer to the right, the 2nd layer to the left, the 3rd layer to the right and 4th layer to right. Repeat on the other side of the pipe cleaner and you are done.