https://www.cutoutandkeep.net/projects/ceramic-earrings • Posted by Jen G.
Although I make these beads myself and I could replace them easily if I lost an earring, I still prefer to use Sterling Silver Safety hooks... I hold classes so you too can make your own ceramic beads. I also have loads of pre-made beads in my shop. ;)
Although I make these beads myself and I could replace them easily if I lost an earring, I still prefer to use Sterling Silver Safety hooks... I hold classes so you too can make your own ceramic beads. I also have loads of pre-made beads in my shop. ;)
I start forming the clay into the shape I want either a ball, a flat bead, etc and either add a hole or pieces of high temperature wire as needed.
After the beads have been slowly air dried, and this drying time can take up 4-5 days in winter, each bead is cleaned gently with a damp sponge to make sure the surfaces are smooth. Re-drilling is usually required because the holes can be partially lost during the cleaning process.
Now the beads are placed in an electric kiln and fired to 1101 Celsius. Then they must be completely cooled in the kiln before removing. This whole process takes about 24 hours.
Once out of the kiln, each bead is painted with tiny brushes. Usually 2-3 coats of specially formulated underglaze colour is applied to each bead and then 2 coats of a clear glaze.
After complete drying, the beads are placed back in the kiln, this time on special supporting racks which I designed myself, and then through a second 24 hour kiln process.
Once this second process is complete, I can hardly wait to open the kiln and catch the first glimpse of the small, colourful treasures I have created! - This is my favoutire step!!!