Button Monogram Art

Button, button, who's got the button?

Posted by Shannon G.

About

Share

You Will Need (10 things)

  • 1 x Fabric a little bigger than your frame
  • Upcycled Canvas Or Frame
  • 200 x lots and lots of the same color Button
  • 1 x Sewing Needle
  • 1 x Thread in color of your buttons
  • 3 x Straight Pins
  • 1 x Staple Gun
  • 12 x Staples
  • 1 x Embroidery Hoop
  • 2 Letter Template

Steps (11 steps, 60 minutes)

  1. 1

    1. First figure out what size frame or canvas you are trying to cover. Add an inch all around to allow for overlap and attaching at the end.

  2. 2

    2. Once you have your size figured out, sketch up the initial you want to recreate. You can freehand a template or print out a font on the computer.

  3. 3

    3. To actually start working, take your piece of fabric and stretch it out over an embroidery hoop.

  4. 4

    4. Pin your monogram onto the center of your stretched fabric.

  5. 5

    5. Now, bust out your button collection! There was two ways to go about laying out your buttons to the monogram. Way one: take out your button collection and lay out all of your buttons over a second paper copy of the initial template to see where and how to affix your embellishments. I did this with my first uppercase letter. It worked out well—I took a digital photo of the layout before moving any buttons so as to preserve my hard work. Way two: wing it! That is the approach that I took for the lowercase letter.

  6. 6

    6. Starting with larger sized buttons, take a needle and thread and attach buttons thru the initial template. Don’t worry; you can cut the paper away later.

  7. 7

    7. Once you have your main, base buttons attached, cut away the paper. If you wait to do this later on after the small buttons are sewn are, it is much harder to remove the paper cleanly. (You can wait, though if you want. I did for the first monogram!)

  8. 8

    8. If you did decide to keep the paper on thru to the small size buttons, take small scissors and start clipping away the paper that you are able to reach. To make it easier, remove the fabric from the hoop. Please be CAREFUL not to cut any threads you have in and around the paper.

  9. 9

    9. Remove your fabric from the hoop (if you haven’t already). Lay the piece face down on a counter. If you used buttons with back loop shanks, you may want to lay the piece down on a slightly padded surface. Lay your canvas or frame over top your fabric, centered. Take your fabric at the top and fold it over the back of the frame. Place one staple in the top center. Fold the bottom of the fabric over the back. Pull taught and place a staple in the bottom center of the fabric. Repeat steps for the left and right side of the canvas. Starting at the top again, pull your fabric taught along the edge, placing a few staples along the way.

  10. 10

    10. If there is any extra bulk fabric on the back, trim around the staples so the back of the artwork can lay flat against the wall.

  11. 11

    11. Hang up—and done!