Cut Out + Keep

Budgie Hammock

could be made for another pet if template is made bigger.

https://www.cutoutandkeep.net/projects/budgie-hammock • Posted by MischievousRaven

I made this for my new budgie as i noticed she loved sitting ontop of my curtains like a hammock. As budgies get bored i thought to make her a hammock to repace her swinging perch. The template above is my own template and i must say i havent tested the hammock out yet! Im sorry if my method isnt understandable and if you have any questions then just ask

You will need

Project Budget
Almost Nothing

Time

1 h 10

Difficulty

Pretty Easy
Medium imag0091 Medium imag0090

Description

I made this for my new budgie as i noticed she loved sitting ontop of my curtains like a hammock. As budgies get bored i thought to make her a hammock to repace her swinging perch. The template above is my own template and i must say i havent tested the hammock out yet! Im sorry if my method isnt understandable and if you have any questions then just ask

Instructions

  1. Print out the template to the size you want (bigger if you have a bigger pet!)

  2. Get some recycled fabric (thicker the better as the hammock will be stronger, i used fleece material from an old bommer jacket), fold it in half so when you pin the template on and cut you have 2 pieces. If you have patterned fabric then make sure the pattern is not facing up towards you because when you sew it will be inside out when you turn it through.

  3. Pin the template and cut 1cm extra for space when sewing. Remove the template but pin both pieces together on all sides ready for sewing. Sew along 3 sides and the forth side make sure you leave a gap (enough to turn it through facing the right way.

  4. Turn the sewn piece back inside out so pattern is right way up, turn in a small seem on the gap and hand sew.

  5. Now the main body of the hammock is done. . . . Using scrap pieces, i created a loop on each corner and sewn it on the main body. This is so when you put the jewelery chain loops to the sewn scrap pieces.

  6. with the jewelery chain, cut 2 small equal pieces for the back and cut 2 longer pieces for the front. Loop through the loops and attatch a jump ring through the both ends and attatch an earring hook to it and clos it. Repeat this on all four corners.

  7. And voila. I will be attatching the short jewelery chain ends on the side in the cage and the long jewelery chain ends to the top of the cage