Bloomy Coins Toggle Clasp Choker

Steal the show with this original design!

https://www.cutoutandkeep.net/projects/bloomy-coins-toggle-clasp-choker • Posted by Photobeads

FINISHED SIZE: 40cm (15.75”) (the size may vary depending on the size of toggle clasps you use) Subscribe to the Photobeads Pattern Express (http://www.photobeads.eu/en/pattern-express) and receive all projects from Photobeads free of charge in your inbox monthly!

You will need

9 Bloomy Coins ceramic photobeads Bead(s) with a red dahlia 9 flower shaped silver plated toggle Clasp(s) 9 silver plated Eye Pin(s) 18 silver plated 4mm Jump Ring(s) Flat Nose Pliers Round Nose Pliers Wire Cutters

Project Budget

Time

Difficulty

Description

FINISHED SIZE: 40cm (15.75”) (the size may vary depending on the size of toggle clasps you use) Subscribe to the Photobeads Pattern Express (http://www.photobeads.eu/en/pattern-express) and receive all projects from Photobeads free of charge in your inbox monthly!

Instructions

1. Use one 4mm jump ring to attach half of one toggle clasp to the eye of an eye pin.

2. String one Bloomy Coin; create a loop on the other side of the eye pin.

3. 

   Use one 4mm jump ring to attach the second half of the toggle clasp to the loop you made. The result should look like this:

4. Repeat steps 1, 2 and 3 with the other 8 Bloomy Coins and Toggle Clasps.

5. Connect all Bloomy Coins together using toggle clasps. Your Bloomy Coins Toggle Clasp choker is ready! And if you don’t feel like wearing a choker today, just take a part of it to wear as a... bracelet!