https://www.cutoutandkeep.net/projects/black-latex-rosebud • Posted by ErsatzEpiphany
After looking at a ton of fabric flower tutorials on this site, I got to wondering what would happen if I tried making one out of latex. (This is nothing new, I pretty much wonder that same thing about everything I come across!) So, I pulled out some leftover scraps from a skirt I made and sort of... made it up as I went along. Latex is a lot bulkier than regular fabric (and these scraps were .45 mm) so though I started off trying to do the 45-degree folds, that quickly went out the window. I would like to try and re-do this idea with some thinner pink latex I am using for another project at the moment. When I have some scraps to do so, I'm sure I'll post pictures! In the end, I am very happy with it. It is about 1" tall and about 1 1/2" wide. Because latex is heavy, I don't think it would go well on a choker or barrette. But I do think that it might look nice on another mini top hat, or a wide headband... we shall see =] [Note: I say that this project costs "almost nothing" under the assumption that if you're going to try it, you already have latex sheeting scraps and latex-making supplies at hand.]
After looking at a ton of fabric flower tutorials on this site, I got to wondering what would happen if I tried making one out of latex. (This is nothing new, I pretty much wonder that same thing about everything I come across!) So, I pulled out some leftover scraps from a skirt I made and sort of... made it up as I went along. Latex is a lot bulkier than regular fabric (and these scraps were .45 mm) so though I started off trying to do the 45-degree folds, that quickly went out the window. I would like to try and re-do this idea with some thinner pink latex I am using for another project at the moment. When I have some scraps to do so, I'm sure I'll post pictures! In the end, I am very happy with it. It is about 1" tall and about 1 1/2" wide. Because latex is heavy, I don't think it would go well on a choker or barrette. But I do think that it might look nice on another mini top hat, or a wide headband... we shall see =] [Note: I say that this project costs "almost nothing" under the assumption that if you're going to try it, you already have latex sheeting scraps and latex-making supplies at hand.]
I cut two strips of latex because I didn't have any scraps that were long enough to make one continuous strip. It didn't matter that there was a seam in the middle, however, since it's all wound up. The first strip is about 1 1/4" wide at one end, and the second is 3/4" wide at the end. I wanted to give it a gradual size change, so the petals wouldn't all be completely uniform.
I also cut some irregularities and dips on one side of the latex, to help make the petals look more "realistic". Then, I wiped down both sides with latex seam prep/cleaner. This makes the latex slightly tacky, so it sticks well to itself.
Once the seam between the two strips had had some time to dry, I rolled the small end about 4 or 5 times (tightly) and then began... making it up as I went along. I left the center clothespinned for a bit to help it stay tightly rolled. I tried to use the 45 degree folds to form the petals, but that was getting too bulky and all the petals were coming out in the same place... so I unrolled everything back down to the center and tried again.
Really, I just goofed around with it until it came together the way I wanted it to. When I was finished, I placed a small amount of latex glue under the end, and used one of those smallish hair clips with the claws to hold it.
I let it sit for a few hours, then came back and used a tiny bit more glue to fold down the end that was sticking up, and to "seal" the edges of a couple of the outer petals.
I decided that it needed a little something extra... so I added a 14SS Swarovski flat back rhinestone in "crystal" using a little dot of Jewel-It. (I'm a firm believer that EVERYTHING needs more rhinestones!) A little final cleanup, and a tiny bit of latex shiner (I use Pjur Cult Latex Shine)... and there you have it!