Beer Tote

Build a Simple Tote for Da Beers

Posted by Rogue Engineer

About

What better way to brighten someones day than with great beer and a DIY beer tote! Arrive to that Christmas party in style with this easy beer tote that you can build in under an hour. Similar totes sell for up to $50, but you can build this one for half the price!

For the project plans, cut list, and printable PDF visit:
http://rogueengineer.com/diy-beer-tote-plans/

Share

You Will Need (6 things)

  • ½ ″ x 6″ x 48″ ( Oak Hobby Board)
  • ¼ ″ x 2″ x 48″ ( Oak Hobby Board)
  • 1 ″ x 3″ x 12″ ( Oak Board)
  • Wall Mounted Bottle Opener
  • Galvanized Handle (3/4″ width)
  • 2 2-1/2″ Kreg Pocket Hole Wood Screws

Steps (5 steps, 180 minutes)

  1. 1

    After cutting all the boards according to the cut list diagram (found on rogueengineer.com) I glued and nailed one side to the base and top.

  2. 2

    Then I glued and nailed the other side on using 1-1/4" brad nails.

  3. 3

    It may have been easier to sand and finish everything before assembly but I didn't so this is when the sanding and staining took place.

  4. 4

    Now the 1/4" thick side pieces get nailed in place.

  5. 5

    Finally, the handle and bottle opener get screwed in place.