https://www.cutoutandkeep.net/projects/badge-cuff • Posted by Cat Morley
Cut two strips of clear plastic, measuring 15" by 4".
Pin the strips on top of each other and sew along one of the sides.
Place a badge below the stitched line and pin beneath the badge.
Sew a second line, using the pin as reference.
Cut off any excess vinyl and place a badge inside the cuff tube.
Stitch down the side of the cuff, leave a 2" space and stitch in another line. Push the badge up against the stitches and sew another line, securing the badge inside the tube.
Repeat this along the cuff, stitching a selection of badges inside the cuff. Leave a 2" space at the second end.
Hammer in a poppers in to each end of the cuff.
Voila!