https://www.cutoutandkeep.net/projects/add-upholstered-cushions-to-chairs • Posted by Krista W.
Turn ordinary wood chairs into custom upholstered beauties with ordinary household tools. Change the fabric when it's time for something new!
Turn ordinary wood chairs into custom upholstered beauties with ordinary household tools. Change the fabric when it's time for something new!
Clamp your board to your chairs and mark 4 places where to drill your holes. Check to make sure you’re not going to hit anything on the bottom of the chair.
Drill through your board and the chair.
(I sanded my corners a little and taped them off with duct tape so they wouldn’t tear through the fabric.) Lay your board on top of your foam and trace the outline. Use scissors of a utility knife to cut the foam to size.
Put your board back onto the chair and insert the carriage bolts into the holes.
Coat your foam with the spray adhesive and put on top of the board. Give it a good press down and let it dry for a while.
Once your glue is dry, cut your fabric to fit the cushions. Give yourself at least an extra 2 inches on each side. Don’t forget to factor in the height of the cushion.
Staple into place and trim the excess fabric off. Put the cushions back onto your chairs and screw in place with the carriage nuts.