https://www.cutoutandkeep.net/projects/3d-paper-hoot • Posted by Artistically
I really love hoots and also love to make them in many, many ways ... in this case I wanted to try to make a 3D Model and I am happy how it turned out ... I really love you enjoy it, too :3
I really love hoots and also love to make them in many, many ways ... in this case I wanted to try to make a 3D Model and I am happy how it turned out ... I really love you enjoy it, too :3
First you need some paste, clay and lots of newspaper pieces. It is obligatory if you use plastic wrap to safe your working place, but you will need it later.
In the first step you use the clay to form the model of the animal or something you want. It is always good to use some water to smooth the clay a bit.
When you enjoy what you have made you need to put the plastic wrap on the model. In this way the newspaper pieces will not be sticked to the clay and you are able to use it later again.
Now it is time for the part I love ... putting lots of paste and newspaper pieces on the model.
You will need about 2-4 layers until you are finished ... and please remember ... more always gonna be better ...
The last layer will be white paper with lots of paste, because using white paper, you are able to choose if you want to color or glue the hoot at the end. Also the paper is stronger than the newspaper.
So here is your finished hoot ... and now the part comes I don't really enjoy ... waiting until everything is dry.
Here you can see the back of the future hoot :3
When the hoot is dry you can remove the clay from the paper and now you have got the clay and the paper model.
Here you can see the back of the paper model. Now you need to cut the edges only, so the back also will look good.
You also need to cut the wings ...
... and the feet :3
The rest is up to you. You can use Acrylic Colors to paint the hoot, use more colored papers to finish it ... feathers ... everything gonna be possible :3