Robot Felt Brooch

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  draw your design onto card & cut out - i always use cereal packets!
  trace round card shape onto your grey felt & cut out.

• 

  Step 2

  cut out small rectangle of black felt for "control panel" add trimmings - i used a red heart brad, a tiny button and two parts of sew on snaps.
  then sew control panel onto robots body - i used three strands of red embroidery thread and used blanket stitch.

• Step 3

  next sew on two parts of snap fastener for eyes and a loop from a hook & loop fastener for a mouth {i openened mine up a little}

• Step 4

  now you need to cut out two slightly larger bodies out of black felt - i drew around my original template onto the felt using a white jellyroll pen then left a seam allowance - you can cut out the back roughly at this stage.
  cut one robot out of card - same size as grey robot.

• 

  Step 5

  using a small piece of double-sided tape i attached grey robot to black body - then blanket stitched in red aroud whole outline of grey robot,next i added detail to his legs.

• 

  Step 6

  sew on a safety pin to other black body - i used more double-sided to stick card body and black back piece to the front then trimmed back to size and blanket stitched in black to complete the brooch.

Versions

+ Add your version

Posted by

harrylaa

Comments

Leave your comment

missmuffcake · Modesto, California, US · 35 projects 6th January 2009

Really cute!

Reply

missmuffcake · Modesto, California, US · 35 projects 6th January 2009

Really cute!

Reply